Machines need to be calibrated regularly so these will be able function properly. A licensed engineer or mechanic is the only one qualified to perform such tests and the length of time it takes to inspect one unit could take hours depending on how complex or sophisticated it is.
If the machines being checked are in large factory such as one that produces cars, teams are dispatched to conduct the calibration. In most cases, this is done every six months. The only difference is that the people who will do this will go to the plant unlike a car owner who will have to drive the vehicle to the shop.
Is there any difference between a machine and a car when it comes to calibration? Yes in terms of the instruments used to conduct such tests. Large ones like those in the factory have to be dismantled and hand held instruments such as frequency counters, multimeters, network analyzers, oscilloscopes, power supplies, spectrum analyzers and RF power meters are used throughout the tests.
Automobiles on the other hand are tested using computers and some similar instruments that will be finished much faster than those in the factory so the owner can drive off when this is done. If a problem has been found, the specialist will recommend that the machine should not be used first until a replacement part has arrived. But in minor cases, a simple adjustment will do the trick making it up and running again.
But the use of calibration instruments is not only done in factories. These are also done in laboratories to make sure the machines used are able to perform to what it was designed to do. The National Institute of Standards and Technology is responsible for setting the regulations making this all possible. After all, safety begins by those who are designing the prototype until the new product is launched into the market. This will ensure that defects can be avoided and recalls are not necessary since this will cost the company a lot of money.
Anything that uses machines will have to be calibrated at one point or another to ensure these are performing well as though these were good as new. The plant may have a crew to do this or a contractor can be called in to perform such services which is really up to those in charge of keeping the place running.
Manufacturing, industrial, and even chemigation processes, benefit from the use of a system that includes the use of a calibration column. A system that includes a calibration column in its process allows you to easily determine the flow rate of liquids that are pumped from your manufacturing, industrial or chemigation processes.
A calibration column is usually made out of clear PVC with industry grade graduations that measure things such as milliliters per minute and gallons per hour. You can install one calibration column for each pump set to measure pump flow rates.
A calibration column is a very important tool. In industrial and chemical processes, precision is of extreme importance and the calibration column assures you of that. All kinds of systems that include processes where liquids are pumped will need the reliability of a calibration column. Pumping system solutions that include calibration columns vary from each other depending on what purpose it will serve.
For instance, if industrial chemicals will be introduced into the system, it is important that the graduation marks on the calibration column are protected from chemical corrosion for it to continue to maintain its integrity. If on the other hand, your pumping systems require the strict regulation of flow rates, you need a system with a calibration column that is connected to an emergency release valve to be able to minimize total risk.
There are many dependable and reliable pump system solutions provider in the market that can supply the right kind of system with the right kind of calibration column for your needs and requirements. To help you along on your search, you might want to check out some industrial grade systems that include the use of a calibration column for your pumping processes.
Cole-ParmerCole-Parmer is an instrument company that distributes various industrial fluid handling products including gear pump systems that come with a calibration column. The company has been around since 1955 and has become one of the largest distributor of instrumentation products that deliver the right solutions to your business. You can check them out online at coleparmer.comKofloKoflo Corporation begun as a family endeavor in the early 1980s and since then has grown in scope and size.
They pride themselves in being able and willing to adapt to their customers’ needs and requirements to be able to provide to perfect fit in terms of industrial instrumentation solutions. They offer different pumping systems that include calibration columns. You can get a quote from them today at their website– koflo.com
About the Author:
Low Jeremy maintains http://Calibration.ArticlesForReprint.com. This content is provided by Low Jeremy. It may be used only in its entirety with all links included.
Article Source: ArticlesBase.com – Importance Of Calibration Instruments In Factories
|
|
MS8218 High Precision PC Auto-Range Multimeter $160.00 |
|
|
BK Precision Model 875A Digital Handheld Multimeter $99.00 |
|
|
Yokogawa 2501A Precision Digital Multimeter x 2sets $399.00 |
|
|
2830 Digital Multimeter BK Precision Dynascan $99.00 |
|
|
Precision Digital 53000 Counts Bench Multimeter DMM $499.98 |
|
|
BK PRECISION 4 1/2 DIGIT TRUE RMS BENCH MULTIMETER $69.00 |
|
|
BK PRECISION 2831A MULTIMETER $109.00 |
|
|
UNI-T PRECISION DIGITAL CAPACITANCE MULTIMETER UT39B $37.99 |
|
|
BK Precision 2704C Electronic Multimeter BRAND NEW $0.99 |
|
|
BK Precision 389A Digital Multimeter $155.00 |
|
|
High-precision digital multimeter $22.78 |
|
|
Vintage Precision Apparatus Multimeter w/probes mod 832 $7.99 |
|
|
BK Precision 2880B Dual-Display Multimeter $239.50 |
|
|
Data Precision 1351 Multimeter V, A, AC/DC Ohms TESTED $34.99 |
|
|
Data Precision 2480R Multimeter V, A, AC/DC Ohms TESTED $49.99 |
|
|
BK PRECISION ELECTRONIC DIGITAL MULTIMETER MODEL 283 $24.99 |
|
|
22000 count MS8040 Bench Top MULTIMETER 4 1/2 Precision $190.00 |
|
|
BK PRECISION 280 MULTIMETER $20.00 |
|
|
Uni-T 5-digit Precision Capacitance Multimeter UT39E $64.99 |
|
|
Data Precision 1450 Dig Multimeter Instruction Manual $25.00 |
|
|
Data Precision 1750 Dig Multimeter Instruction Manual $25.00 |
|
|
Data Precision 245 Multimeter IInstruction Manual $30.00 |
|
|
Data Precision 258 Multimeter Instruction Manual $25.00 |
|
|
Data Precision 3400R Multimeter Instruction Manual $30.00 |
|
|
Data Precision 3600 Digital Multimeter Operating Manual $35.00 |
|
|
BK Precision Digital Multimeter 2831A $14.95 |
|
|
Data Precision 1350 Digital Multimeter $99.00 |
|
|
Uni-T Precision Modern Digital Multimeter UT39E Prof $66.99 |
|
|
BK Precision 2830 Digital Multimeter Instruction Manual $25.00 |
|
|
BK Precision 114B 20 000 Ohm/V Analog Multimeter $42.00 |
|
|
Precision Multimeter Bridge LCR & LC Meter OHM Tester $69.98 |
|
|
Lot – (3) Multimeters – BK Precision autoranging, tenma $39.60 |
|
|
Data Precision 1750 Digital Multimeter #7031 $24.99 |
|
|
Data Precision 2400 Digital Multimeter Manual $35.00 |
|
|
Data Precision 1455 Digital Multimeter Manual $35.00 |
|
|
Data Precision 245 Digital Multimeter Manual $15.00 |
|
|
Data Precision 2500 Digital Multimeter Manual $35.00 |
|
|
Data Precision 2400 Digital Multimeter Manual $35.00 |
|
|
Data Precision 938 Multimeter – Lot of 2 $99.00 |
|
|
BK Precision Electronic Multimeter Model 290 Repair $34.99 |
|
|
Uni-T Precision Modern Digital Multimeter UT39E Prof $66.99 |
|
|
Vintage BK Precision Multimeter model 117 $14.99 |
|
|
Uni-T Precision Modern Digital Multimeter UT39E Prof $66.99 |
|
|
Data Precision 2480 Digital Multimeter $332.00 |
|
|
DATA PRECISION 258 Digital Multimeter Instruction Man $24.99 |
|
|
BK PRECISION 280 DIGITAL MULTIMETER OWNER’S MANUAL $14.95 |
|
|
BK Precision 2408 Mini-Pro Multimeter $49.99 |
|
|
BK Precision 2705B AutoRanging Multimeter w/Logic Probe $65.00 |
|
|
BK Precision 2707B Tool Kit Digital Multimeter $91.00 |
|
|
DATA PRECISION 2480/2480R MULTIMETER INSTRUCTION MANUAL $9.95 |
|
|
Data Precision 1350 Multimeter V, A, AC/DC Ohms TESTED $24.99 |
|
|
Data Precision 936 Digital Multimeter $19.99 |
|
|
DATA PRECISION 2480 DIGITAL MULTIMETER/ LEEDS $34.99 |
|
|
BK Precision Model 117B, Analog Pocket Multi Meter $12.95 |
|
|
Digital Multimeter BK Precision Mini-Pro W/Bat.Test NEW $24.99 |
|
|
Amprobe PM55A Red and Black Compact Precision Digital Multimeter $49.95 AutoTect Feature Directs The Meter To Know If Its Measuring AC Or DC Volts Or Resistance With No User Interface — The ultimate shirt-pocket sized meter. Only 3/8″ thick and less than3 oz in weight with full functionality offering ac and dc voltage to 600 V, ac and dc current to 2000 microA, resistance to 6 Megohm, capacitance to 2000 microF, frequency to 30 kHz, diode test and continuity w/beep… |
|
|
BK Precision 2703B TOOL KIT DMM 0.5% $38.00 … |
|
|
BK Precision 389A Digital Multimeter $119.99 Ruggedized case — Auto power off — Designed to meet IEC61010-I CATIII 600 V, class 2 — High performance and value priced, the BK Precision 389A offers more features for the dollar than any other multimeter. Dual injection molding process allows a better grip and protection. CE marked and UL listed. — Includes: Test Leads; (1) 9 Volt Battery; (1) Instruction Manual; (1) Thermocouple Probe… |
Incoming search terms for the article:
- 2830 DIGITAL MULTIMETER
- 3500 MULTIMETER
- B&K precision 280 digital multimeter
- cache:uz9cpoXpqFsJ:www kingmlm net/ ???????
- Cole-Parmer Instruments Co
- DATA PRECISION 3400 Multimeter
- data precision 3500 dmm
- diy multimeter calibration
Related posts:
Tags: charger, diy, dmm, electronics, tools
